AIR Equipment

FMC AR174-AB 4 Basket Static Retort (7 photos available)

4 basket

TSG As new 50kw boiler (7 photos available)

The 50 kw boiler is approx.. 2 years old and has only been used 3-4 times.
BENEFITS
• Highest Efficiency - for lower running costs:
Independent tests of operating efficiency as high as 83%. This is a full 3% higher than most others on the market.
• Fast Heat Up - start work faster:
Thermic boilers make steam faster than most other boilers in their class.
• Compact Design - Smallest Floor Space:
Due to the vertical firing the THERMIC range has the smallest "Foot-Print" in its class.
• Ease of Operation - minimal training and maintenance:
All Thermic boilers are fully automatic and require minimal maintenance.
• No Operator Certificates - anyone can operate:
All models comply to AS2593, this means no operator certificates.*

Boiler Specifications

Type: Vertical Watertube
Capacity: 50Kw
Steam flow f & A 1000C: 80kg/hr

Max. Pressure: 1600kPa
Operating Pressure: 700kPa
Test Pressure 2400kPa
Fuel: Natural Gas @ 7kPa
Fuel Consumption: 200mj/hr
Burner: On/Off complete with gas train which complies with State Regulations.
Control: Standard
Status: Low Hazard (No operator required)
Control Panel: Standard
Boiler Blowdown Drain: Complete with isolation valve and timed auto blowdown.

Boiler Ancillary Components
Feedwater Pump: Vertical Multistage
Burner: Nu-Way or equivalent
Safety Valve: VYC
Check Valve: M E Mack
Globe Valve: KSB
Insulation: 75mm Compressed Rockwool
Cladding: Polished Stainless Steel
Gauge: Boiler pressure gauge only

Boiler Skid Arrangement
- 6m High Mild steel stack
- 100L Mild steel Feedwater tank
- 30L Blowdown Vessel
- Chemical Pump

Steam table at 8 bar pressure, note temp

Property Metric Unit Standard Unit
Temperature (T) 170.4 C. 338.8 F

Pressure (P) 8.0000 bar 116.03 psi
Density Saturated Liquid ( f) 896.98 kg/m3 55.997 lb/ft3
Saturated Vapor ( g) 4.1595 0.25967

Specific Volume Saturated Liquid (vf) 0.0011149 m3/kg 0.017858 ft3/lb
Saturated Vapor (vg) 0.24041 3.8511

Internal Energy Saturated Liquid (uf) 720.22 kJ/kg 309.64 Btu/lb
Evaporated (ufg) 1856.6 798.18

Saturated Vapor (ug) 2576.7 1107.8

Enthalpy Saturated Liquid (hf) 721.13 kJ/kg 310.03 Btu/lb
Evaporated (hfg) 2048.0 880.5

Saturated Vapor (hg) 2769.1 1190.5

Entropy Saturated Liquid (sf) 2.0462 kJ/kg-K (mayer) 0.48873 Btu/lb- R

Evaporated (sfg) 4.6166 1.1027

Saturated Vapor (sg) 6.6628 1.5914

Steam table at 7 bar steam, note temp

Property Metric Unit Standard Unit
Temperature (T) 165.0 C 329.0 F

Pressure (P) 7.0000 bar 101.53 psi
Density Saturated Liquid ( f) 902.54 kg/m3 56.344 lb/ft3
Saturated Vapor ( g) 3.6648 0.22878

Specific Volume Saturated Liquid (vf) 0.0011080 m3/kg 0.017748 ft3/lb
Saturated Vapor (vg) 0.27287 4.3709

Internal Energy Saturated Liquid (uf) 696.45 kJ/kg 299.42 Btu/lb
Evaporated (ufg) 1876.1 806.58

Saturated Vapor (ug) 2572.4 1106.0
Enthalpy Saturated Liquid (hf) 697.23 kJ/kg 299.75 Btu/lb
Evaporated (hfg) 2066.3 888.3

Saturated Vapor (hg) 2763.5 1188.1

Entropy Saturated Liquid (sf) 1.9922 kJ/kg-K (mayer) 0.47584 Btu/lb- R

Evaporated (sfg) 4.7158 1.1264

Saturated Vapor (sg) 6.7080 1.6022

Complete crumb batter and fry line with Spiral freezer (19 photos available)

A complete line from batter mixer to spiral freezer, commissioned last year but due to raw material unavailability (drought) factory has to close.

1) Preduster (2655x835x2220mm)
2) Vacuum dust extractor/air flow system (1038x900x2200mm)
3) Tempura Batter applicator with auto level and cooling device (2820x688x1650mm)
4) Batter mixer (approx 1258 x 836 x 1130mm)

1) Fryer (approx 4m length) with hold down belt, gas fired.

Freezing Equipment:- 15 tier spiral
1) Spiral Freezer (room is 4800x3100x3100mm-approx)
Note the spiral freezer only includes two walls (i.e. one side and front) as built in an existing freezer room and used the existing two walls (for one side and back wall). Includes the floor as well (stainless steel floor with insulation).
Spiral has 15 tiers (spaced at 120mm – effective 65mm) with drum dia. of 1100mm (plus 400mm belt)
Capacity 300kg/hr
Food grade 304 stainless steel.

Factory commissioned late June last year (2010) and has had minimal hours use.

The plant is pretty new and with little use. All looks of a good construction and finish. The electrical panels are good with Siemens or Delta VSDs and in solid cabinets all to Australian standards.
The Spiral freezer is solid.
The fryer has tubular HE fired with natural gas

More photos available on request.

Contact John at johnl@assetinvest.com

Votator scraped surface HX (19 photos available)

Previously used in the manufacture of licorice, this scraped surface HX is high pressure (450 psi) and has a barrel inside diameter of approx 250-300mm.It was connected to an 850 kPa steam boiler.

Length of unit - 2.8mtrs
Heating Chamber - 1mtr
3 Phase 4 Pole motor
25amp output / 20 hp / 15 kw
Gearbox is a Barlow 15 kw / 333 round per minute

Cooling Tunnel (5 photos available)

All stainless steel construction with variable speed belt 12 metres long, 600mm wide, overall length 15 metres with 2 refrigeration units.
Product height 100 mm.
Previously used for confectionery with an inlet temperature of 50 deg and an outlet temperature of -4 deg.
Splits into 4 sections for easy transport.

TETRA, WESTFALIA etc Complete aseptic milk line, 15,000L/hr, with packaging - 2004 (5 photos available)

Complete 15,000 L/hr Milk Processing plant
Processing, Pasteurisation, UHT and Tetra Pak Tetra Brik 1L and 200ML Packing lines
Mostly new in 2004

Pasteurisation Unit:
Pasteurisation: Make: Tetra Therm Lacta, Built 2004, Capacity: 15000 l/h
Deaerator: Built 2004, Capacity: 13000-19000 l/h
Seperator: Make: Tetra Centri Control, Built 2004, 25000 kg/h
Homogeniser: Built 2004, Capacity: 5000 l/h-200 Bar
Clarifier: Make: Gea Wesfalia, Built 2009, Capacity: 25-35 m3/h

UHT Unit:
Tetra Flex: Built 2004, Capacity: 6000-12000 l/h Milk or Juice
Tetra Alsafe: Built 2004, Capacity: 20,000 l
Homogenizer: Built 2004, Capacity: 6000-12450 l/h
Deaerator,
Double Wall Tanks: Make: Gemak, Built 2008 Capacity: 50000 lt

1000 ml Slim Packaging Line:
Tetra Brik TBA 8 1000S aseptic form and fill machine
Built 2004, Capacity: 6000 Pack/h
Tetra Pak pull tab applicator: Built 2004
Tetra Cardboard packer: Built 2004
Tetra Cap applicator: Built2004
Accumulator Easy Ride: Built 2004

200 ml Slim Packaging Line:
Tetra Brik: TBA/19 200SI aseptic form and fill machine,
Built 2000, Capacity: 7500 Packs/h
Tetra Cardboard packer: 70, Built 2000
Tubex 9001: Built 2000

Contact George Roberts or John Leigh
sales@assetinvest.com

Ishida DACS V3 012 Metal Detector and Check Weigher (3 photos available)

Ishida DACS VS 030 Metal Detector and Check Weigher (3 photos available)

Check pdf for full specs

DACS -VS 030
Max product weight - 5 kg
but set up for 3 kg
+- 130 pieces min

Dacs
ID3-4518
Product weight 3kg
Aperture width - 450mm
Height - 180m
Passage width for product - 395mm
Det Sensi8vity - .7mm ball
Conveyor Speed - 32m/min
Alarm - Belt stops, Buzzer sounds, or auto reject

Dominioni Punto & Pasta F2 Great little machine for smooth or grooved Gnocchi (1 photo available)

Height: 1410 mm
Width: 420 mm
Depth: 800 mm
Weight: 120 kg
Installed power: 0.5 kw
Hourly output: 65 kg

Purpose Built Australia Heat Pump Drier suitable for drying fruits, veges, pasta, or any foods requiring quality results (1 photo available)

- Built in 2008 costing $140000 approx with very little use.
- Fully controlled via computer program
- Built on galvanised frame which allows for easy transport.
- Dimensions External (4m W by 4.70 L by 2.35 H)
- Internal (340 round) (Rotating floor – 3.35m). (2010 H)
- fits 8 (1200 mm by 600mm trolleys)
- 415 volt 32 amp
- Bitzer compressor 10Hp approx
- Rotating floor for even drying

This drier is suitable for drying fruits & vegetables, pasta, or any foods requiring quality results

FEDERAL Rotary Bottle Filler, 8 head with monobloc capper ready for installation (2 photos available)

Federal Filler
43 bottles per minute (bpm) x 2L bottles (with 38mm neck finish (milk bottle type))
80 x 1L bpm
120 x 500mL bpm

In outstanding condition.
Change parts to suit new users bottles readily available
Currently used in a dairy hygiene facility, yet suitable for low pH or semi viscous products.
georger@assetinvest.com or mobile 0412 201 999

TOYO JIDOKI TT-8CR Doy Pouch Filling & Sealing Machine (3 photos available)

This pouch filling machine is suitable for packing liquid/powders into pouches
It can be used for retortable pouches
It is a stainless steel clad unit, with a mild steel base
Last used for filling liquid products
Capacity of the unit is approx 20 -45 ppm - product dependent
The unit is in good condition and was new 1986

Unit is offered in good working condition, and can be viewed working, prior to delivery ex works
This unit is presently on the water from Japan, so first come first served at $52,000 AUD firm (excl GST)

PDF from info on mnfrs website included for reference only

For further details & enquires please contact
George Roberts on mobile/cell +61 412 201 999 or email georger@assetinvest.com

PULSA Tub Filler for 200 and 350mm tubs, 110mm dia. Twin lane, inline (3 photos available)

Complete twin lane inline tub filler with offtake conveyor and rotary turntable

CASSA HERRERA VARIOUS Complete Flour Tortilla Line - (3 photos available)

Capacity Flour Tortilla Line

6” 10800 pcs/hour
8” 10800 pcs/hour
10” 6000 pcs/hour
12” 4800 pcs/hour

This is based on the Press doing 20 strokes/min

1 - Diosna W120a Wendelmixer with 2 stainless steel bowls,120 kg dough/batch
1 - Scanico stainless steel bowl lift,bought new in 2004
1 - Used/reconditioned “Lawrence Equipment” all stainless steel dough chunker with pneumatic discharge gate.
1 - Used/reconditioned “Werner Pfleiderer” 9 pocket wide dough divider/rounder. Scales 1 ounce to 4 ounce dough balls at 50 strokes per minute. Ram and sheer type divider utilizing a molding drum to product a round tight dough ball. 1997 model twi-mat, serial no. ODR 0008-01 DR 264. Manufactured 9/26/97.
1 - Used/reconditioned “Lawrence Equipment” 9 pocket wide overhead proofer. All stainless steel construction with nylon mesh proofer cups. Built in control panel with PLC and electronic components to interface with auto loaders and press. Year model: 1993. Note:
1 - New, Casa Herrera “stamp-in-place” style 9 ball drop auto loader for 6 inch to 8 inch diameter tortillas
1 - New “Casa Herrera” 5 ball drop “stamp-in-place” type auto loader for 10 inch and/or 12 inch diameter tortillas.
1 - Used/reconditioned 1994 “Lawrence Equipment” Legend series flour tortilla press. Model no. OFP32-33-08, serial no. FP258. Features electric drive and belt tracking (only on newer models).
1 - Used/reconditioned “Lawrence Equipment” 1994 flour tortilla oven, model OFO 34-10-12, serial no. FO249. , 1.2 million btu propane gas atmospheric combustion system. 11 WCI pressure required.
1 - Used/reconditioned all stainless steel “Lawrence Equipment” 9 tier cooling conveyor, model 36-20-9, serial no. CC309. 14 foot incline infeed (from oven), 20 foot, 9 tier cooling bed, 5 foot discharge white neoprene belting. Conveyor belt is flat-flex stainless steel wire, with AC inverter variable speed drive.
1 - Arr Tech Counter Stacker 1200 mm wide,bought new in 2004,with canisters for
6”-8” 10”-12” tortillas
1 - Electrical Panel made brand new in 2008 with Siemens PLC

Blast Freezer (3 photos available)

Batch blast freezer with new Blitzer Semi Hermetic Compressor (value $10,800) and new condenser ($2,500) recently fitted.

1200 wide
1210 deep
2330 high (Not counting freezer unit)
1130 deep inside
1840 door opening height
735 door width
760 useable width inside

Sipromac 620A vacuum packer with gas flush (3 photos available)

Sealing bars (one each side of both chambers) 670mm.
6 gas discharges along each bar.
720mm. between each bar.
Depth for product 130mm. increasing towards the middle of chamber

Baker Perkins Integra Bread Roll Line (3 photos available)

Rolls
Baker Perkins Integra bun divider/rounder
4 row
Intermediate prover
2 moulders for 2 size rolls

2 bread slicers

Baker Perkins Sterling Bread Line (4 photos available)

Baker Perkins Integra etc Bakery Equipment for sale (8 photos available)

Kemper 250 kg spiral mixer with 2 bowls
Australex 250 kg 2 arm mixer with 3 bowls

Sterling single pocket Divider rebuilt – 2kg dough sausages
Sterling dough rounder
Sterling intermediate prover, 6 pockets across
Bread moulder approx 800 pcs/hour with approx 200 trays + bread tins/lids

Rolls
Baker Perkins Integra bun divider/rounder
4 row
Intermediate prover
2 moulders for 2 size rolls

2 bread slicers

Oven
Baker Perkins Thermoradiant
2 burner 50 swing tray type carriers, 2.44m
Overall 13m x 3m

Purpose Built 1.5 metres wide x 10 metres long Tunnel Pasteuriser (1 photo available)

Tunnel Pasteurizer.
This used tunnel pasteuriser is
1.5 metres wide x 10 metres long stainless steel mat tanks cladding etc
1) Used for pickled onions pickled cumbers.etc. 250 gm jars to 1KG jars
(2) Heated by water spray
(3) Belt stainless steel ribbon type Melwire
(4) Temperature profile to suit product process this effects throughput
(5) Cooling by water sprays
(6) Water tanks heated by steam
There are two zones - heating and cooling, each fitted with controls and pumps
KEEN SELLER - more details on request
Call George on 0412 201 999

STERI COOLER 1.8m wide x 10m wide, plastic belt, pasteuriser (unused) - 8,000 bph (3 photos available)

This unit was purchased and never put into operation
3 Zoned sterilizer/precooler/cooler
KEEN SELLER - Call George on 0412 201 999

STERI COOLER

Belt length - 10,00mm
Overall length 1,900mm

SPECIFICATIONS:-
Belt length - 10,00mm
Overall length 1,900mm
• Material: SUS304
• Capacity: 8000 bottle/h (based on Ø 75mm bottle)
• Sterilization temperature: 100°C
• Sterilization time: 20 minutes
• Total power rating: 12.5Kw (feed conveyor 0.55Kw, discharge conveyor 0.75Kw,
Hot water pump 4.5Kw, warm water pump 2.2Kw & main drive 4.5Kw)
• Sterilization section: 1800mm wide x 7000mm long
• Pre-cooling section: 1800mm wide x 2000mm long
• Cooling section: 1800mm wide x 1000mm long
• Steam pressure: 0.4MPa.
• Conveyor belt: “Rexnord” brand, CPP materials

Consisting of:
• Steri-cooler proper: 1 unit (3 sections: sterilization, pre-cooling & cooling)
• Bottle feed conveyor, single chain, 4m long c/w variable speed drive: 1 set
• Bottle discharge conveyor, double chain, 4m long c/w variable speed drive: 1 set
• Main drive: 1 set
• Hot water pump: 1 unit
• Pre-cooling water pump: 1 unit
• Recycling water tank:2 units (c/w filter)
• Automatic temperature control valve: 1 unit
• Digital temperature controller: 1 unit
• Electrical control system: 1 set
• Automatic steam control piping: 1 set
• Steam by-pass piping: 1 set
• Inlet & outlet water piping: 1 set

SMB Tunnel Cooler - 4 zones (3 photos available)

Cooler has 4 cooling zones and is fitted with nozzles for spraying on chilled water.
1.2m wide belt with an overall length of 14m
Max product height is 300mm
Each zone has an individual centrifugal pump

APV MC18 2 stage homogeniser - NOTE - cracked piston block (3 photos available)

This homogenizer was in operation until recently and is fitted with a 75Kw electric Motor
It was operating at around 180Bar pressure
Owners are keen sellers, so if you can rebuild or need spares, make an offer
No pics available at present

RONCAGLIA Complete Milling Plant - suitable for flour or grains (7 photos available)

Complete Mill - for milling and sifting
Consisting of:-
Two Roncaglia Roller Mills. They are designed to work together.
Roller No 1 is equipped with cutting rollers to do the primary role of cutting off the grain coating (bran). This is then separated using a bran sifter. Grain then returns to Roller No 2 which is equipped with smooth rollers to fine roll the grain into flour.
Each Roncaglia Roller Mill is equipped with two pairs of 1000mm x 230mm rollers with each pair driven by 11kw flange mounted direct coupled 3 phase motor.
These mills have a series of spare gears to alter speed of rollers and give a range of roller speeds.
Dimensions are overall length 2700mm x 1200mm x 1300mm. The weight is 2700kgs.

Photos attached show flour/bran separation machines
4 of Fine Bran Brushers
1 Intensive Flour Screen
2 Grading Brush after 1st Roller Break
2 Fine Bran Pan Sifters
1 Intensive Wheat Dampener
8 Dust Sock Towers
Currently dismantled and warehoused
OWNER NEEDS SPACE AND IS KEEN SELLER
CALL GEORGE ON (+61) 0412 201 999

RONCAGLIA Set of two flour or grain roller mills (5 photos available)

Two Roncaglia Roller Mills. They are designed to work together.
Roller No 1 is equipped with cutting rollers to do the primary role of cutting off the grain coating (bran).
This is then separated using a bran sifter.
Grain then returns to Roller No 2 which is equipped with smooth rollers to fine roll the grain into flour.
Each Roncaglia Roller Mill is equipped with two pairs of 1000mm x 230mm rollers with each pair driven by 11kw flange mounted direct coupled 3 phase motor.
These mills have a series of spare gears to alter speed of rollers and give a range of roller speeds.
Dimensions are overall length 2700mm x 1200mm x 1300mm. The weight is 2700kgs.

As these two roller mills are a unit, they are for sale as a pair

KEEN SELLER

For more equipment please visit www.assetinvest.com

AIR Asset Investment Recovery (+61 8 9438 2244) is an International database of surplus and idle new and used food processing equipment and machinery such as Urshel and FAM dicers, Stephan, steam, H&C, heat and control, ice cream, tub filler, used dairy, used dicer, used kettle, used food processing, used meat machinery, used packaging equipment, dicers, Angelus canning equipment, retorts, ribbon blenders, twin paddle blenders, homogenisers and homogenizers for dairy. http://www.assetinvest.com