Stainless Steel Heat Exchangers
General heating and cooling duties. Heating by means of steam.
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids
between which heat transfer will take place.
The plate pack is assembled between a fixed frame plate and a movable pressure plate and compressed by tightening
bolts. The plates are fitted with a gasket which seals the interplate channel and directs the fluids into alternate
channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and
temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure.
The plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar,
both of which are fixed to a support column.
|Model||M3, M6 & M10|