2011 G S ITALIA GRIGLIATORE DRUM GAS GRILL MARKER GS

G S ITALIA GRIGLIATORE DRUM GAS GRILL MARKER with Horizontal Rolls.

Year 2011 S/n R59-11 Weight 600 KG 1Kw 400 Volts

Footprint 3m long x 1.8m Wide x 1.6m High

Belt 800m Wide x 3m Long.

“Add the Grill Look — Without Cooking Through”

The “Grigliatore Drum Gas Grill Marker” is an industrial grill‐marking / “grill‐striping” machine used in food processing lines. It does not cook through — rather, it applies visual “grill marks” (seared stripes) to products (vegetables, meat fillets, fish, etc.) passing between heated rolls. GS Italia+5GS Italia+5GS Italia+5

Key uses / advantages:

• Adds grilled appearance (visual appeal) to processed foods without full cooking
• Works on slices, diced vegetables, fillets, etc. DirectIndustry+2GS Italia+2
• Can handle partially wet or salted products (if pre‐treated) Machines4U+3DirectIndustry+3GS Italia+3
• Good for “value-added” processing (for example, veggie slices, pre-grilled appearance before freezing / packaging)

Because it’s a niche industrial machine, marketing to food processors, packers, ready-meal manufacturers, etc., is the right direction

Key uses / advantages:

• Adds grilled appearance (visual appeal) to processed foods without full cooking
• Works on slices, diced vegetables, fillets, etc. DirectIndustry+2GS Italia+2
• Can handle partially wet or salted products (if pre‐treated) Machines4U+3DirectIndustry+3GS Italia+3
• Good for “value-added” processing (for example, veggie slices, pre-grilled appearance before freezing / packaging)

Because it’s a niche industrial machine, marketing to food processors, packers, ready-meal manufacturers, etc., is the right direction.

.Specifications (Typical Model GS / GSI03):

• Construction: AISI 304 stainless steel
• Function: Grill marking (visual stripes, not full cooking)
• Burners: 2 x MICROFLAME gas burners (upper & lower)
• Gas type: Methane or LPG
• Gas consumption: ~6 m³/h (methane) or ~3 m³/h (LPG)
• Heating power: ~16,000 kcal/h
• Grill rolls: Ø170 mm, standard 13.5 mm pitch (custom available)
• Adjustable roll gap: up to ~80 mm
• Warm-up time: ~90 min
• Cooling: 90–180 min recommended
• Throughput: 100–400 kg/h (product dependent)
• Motors: Feed conveyor 0.37 HP (~0.27 kW)
• Installed electrical power: ~1 kW
• Safety: Emergency stops (panel & body), CE compliant
• Dimensions (example): ~3000 × 1800 × 1600 mm
• Weight: ~600 kg